Products

A high-purity silica powder media optimized for precise separation and purification processes. This carefully engineered adsorbent provides exceptional control in chromatographic applications and targeted compound removal. Its optimized surface chemistry makes it particularly effective for polar compound separation and analytical-grade purification needs.

Sodium Bicarbonate Sodium Bicarbonate is a commonly used after a bleaching scrub to increase the pH of a solution. Sodium bicarbonate can also be used as a safety precaution in the lab, as it is effective at putting out small grease or electrical fires. NOTICE: In order to guarantee our chemicals are...

DOWNLOAD SAFETY DATA SHEET T-41® Acid activated bentonite clay, contains carbon, low pH (3) Consistent particle size, good flow rate Can be used for oil purification, distillation prep and pesticide removal NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.

DOWNLOAD SAFETY DATA SHEET T-5® Highly active bentonite clay with a neutral pH Cost effective for full life cycle Used for winterization, oil purification, distillation, and overall product improvement Effective to remediate lead, arsenic, cadmium, and mercury NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot...

DOWNLOAD SAFETY DATA SHEET ZeoClear™ L [Particle Size & pH]: ZeoClear™ L has a particle size of 0.250mm and a neutral pH of 6.7. [Composition]: ZeoClear™ L is a durable, naturally occurring granular attapulgite that has been thermally activated at high temperature to increase the porous surface area of its...

DOWNLOAD SAFETY DATA SHEET ZeoClear™ Y [Particle Size & pH]: ZeoClear™ Y has a particle size of 0.250mm to 0.595mm and a pH of 9.2. [Composition]: ZeoClear™ Y is a naturally occurring granular attapulgite which has been thermally activated to remove impurities and maximize adsorption capabilities. This magnesium aluminum silicate...

[Size]: 58/85 OZ. BIG Capacity Deep, metal scoops for dry goods assure a user experience with no spills, no more hassle when you need to scoop ice from ice-making machine. [Quality Materials]: The Scoop is made of Heavy duty Dia Casting Aluminum, which is durable, stable, rust and corrosive resistance...

Caster 4x1-1/4 plate swivel with strap style brake & a gray TPR tread on lightgray polypropylene hub wheel with ball bearings. Zinc plated

[Material]: Polyurethane Wheel. [Size]: Wheel Diameter: 5"; Tread Width: 1-1/4"; Overall height: 5-5/8"; Swivel Radius: 4-1/8". [Load capacity]: 280 Lbs. each. [Wheel Bearing Type]: Delrin. [High Quality]: Wheels are durable and soft, light but strong. The smooth roller is scratch-resistant. Designed to avoid damage to hardwood, laminate, tiles, slate, carpet,...

SKU:CF-TUBE-20ML Ten pack of 20 mL centrifuge tubes inserts. The tubes do not come with caps. Works well as inserts for centrifuges. SKU: CF-TUBE-50ML Two pack of 50 mL centrifuge tubes inserts. The tubes do not come with caps. Works well as inserts for centrifuges. Also available in 20 mL.

A CGA fitting is the standardized system for the attachment of a compressed gas cylinder to the required regulator or transfer line. Examples of CGA fittings would be CGA-580 for Non-flamable, Non-oxidizing gasses such as Nitrogen, Argon, or Helium. CGA-320 Nut & Nipple w/ Washer, CO2 Carbon Dioxide Fittings x...

Replacement Gasket for 1.5" Check Valve Material: EPDM Bigger Gasket O.D./I.D.: 77mm/55mm(3.03"/2.17") Smaller Gasket O.D./I.D.: 37mm/28mm(1.46"/1.10")

Chemtek Alumina 150 Safety Data Sheet Alumina 150 Alumina 150 is a neutral pH adsorbent used to remove moisture, free fatty acids, and phospholipids to speed up crystallization and to improve the end products’ oxidative stability. pH(10% slurry) : 6.5 Bulk Density: 932 g/l Particle Size Distribution: 50-200 Microns Water...

DOWNLOAD SAFETY DATA SHEET B80 B80 is an attapulgite clay adsorbent that uses its inherent properties to bleach and purify edible oils without the use of chemical additives. This is a naturally active bleaching adsorbent which has a surface area more than 400 m²/g. It has no effect on double...

Chemtek ChloroSorb Acidic Safety Data Sheet Chemtek ChloroSorb Acidic Technical Data Sheet ChloroSorb Acidic ChloroSorb Acidic Filtering Media is an acid-activated bentonite/carbon blend for bleaching and deodorization. It is generally used for additional bleaching efficiency in conjunction with other sorbents. Contains 5% carbon. NOTICE: In order to guarantee our chemicals are factory-fresh and...

Chemtek ChloroSorb Natural Safety Data Sheet ChloroSorb Natural ChloroSorb Natural Filtering Media is a heat activated bentonite/carbon adsorbent for bleaching and deodorization. Contains 10% carbon. NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.

DOWNLOAD SAFETY DATA SHEET ChloroSorb Neutral ChloroSorb Neutral is an acid-activated bentonite/carbon adsorbent that has been neutralized to a neutral pH of 7. General uses are bleaching, deodorizing, or heavy metal removal. NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for...

DOWNLOAD SAFETY DATA SHEET CT1 CT1 is a kaolinite clay that is great at pulling difficult to remove oxidized color bodies, chlorophylls, and carotenoids. It has a highly activated surface area well suited for the removal of impurities from edible oils. NOTICE: In order to guarantee our chemicals are factory-fresh...

DOWNLOAD SAFETY DATA SHEET CT5 CT5 is a blend of kaolinite and montmorillonite clays. It is great at pulling difficult to remove oxidized color bodies and carotenoids. It has a highly active surface area well suited for the removal of impurities from edible oils.  NOTICE: In order to guarantee our...