Media

8*12Mesh Bead Size: 1.6~2.5 Bulk Density:  ≥0.70~0.82 g/ml Equilibrium Water Capacity @25℃: ≥ 19.0~20.0 wt% Equilibrium Ethylene Capacity: ≤3.0mg/g Heat of Adsorption: BTU/lb of H2O  1800 Point Contact: N≥20~58 Variation Coefficient: 0.3 Attrition Rate: wt%≤ 0.1 Size Qualification %≥ 98 Package Moisture: wt%≤ 1.5 Applied in the desiccating process of...
Highly active bentonite clay with a neutral pH Cost effective for full life cycle Used for winterization, oil purification, distillation, and overall product improvement Effective to remediate lead, arsenic, cadmium, and mercury   NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.
Activated Alumina Granular Used to aid removal of fats, chlorophyll and waxes Commonly used as an aid for color purity   NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.
Activated Hardwood Carbon is powdered charcoal, which has a neutral pH and is used as a filter aid and scrubbing absorbent during oil purification, distillation, pesticide/color removal, odor reduction, and product improvement.   NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.
Acid activated bentonite clay, contains carbon, low pH (3) Consistent particle size, good flow rate Can be used for oil purification, distillation prep and pesticide removal   NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.
Pure-Flo Natural products use our clay’s inherent properties to remove impurities in oil without the use of chemical additives. Because these products are naturally active there is no danger of mineral acid carryover in finished oils.
$600.00
Degumming clay is used at the beginning of a hot scrub, resulting in needing less absorbents in the follow up process. The oil will have less gums making the absorbents more effective. Degumming clay has a low pH of 2.5, but can be used in very small quantities so as...
Spherical, powdered, chromatography grade Commonly used as stationary phase in Column Chromatography Aids in solution fractionation NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.
Desiccant, color changes from blue to brown when loaded Commonly used for drying propane or butane Purification of various gas streams and liquids NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.
This alkaline filtration media is commonly used at the end of a scrub to balance the pH and add more remediation support in the solution.   NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.
Degumming enzyme is phospholipase and can be used for high activity in breaking down phospholipids (gums), triglycerides, and sugar lipids. Recommended 2g of enzyme for 1kf of oil, 7.5 water pH, 40C. This powder can achieve separation via hydration of the phospholipids, which breaks them down without the use of any...
Sale
$440.00
  Activated, amorphous magnesium silicate Used for pesticide removal during the oil purification process Myclobutanil focused Can also be used in aid of color purification   NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.
Sodium Bicarbonate is a commonly used after a bleaching scrub to increase the pH of a solution. Sodium bicarbonate can also be used as a safety precaution in the lab, as it is effective at putting out small grease or electrical fires.   NOTICE: In order to guarantee our chemicals are factory-fresh...
Drierite Indicating Molecular Sieve 4 Mesh Indicating DRIERITE is blue when dry and changes to pink upon absorption of moisture Can be regenerated repeatedly for reuse by heating for 1 hour at 210 degrees C
Celite 545 is a formulation of Diatomaceous Earth that is used as a filtration aid for the pre-processing of distillate. Diatomaceous earth is considered as skeletal remains of single-celled algae/diatoms formed due to sedimentary deposits. This filtration aid is used in laboratory settings and is a surface-active filtration agent which...
Specification Bead Size: 8-12 Mesh Bulk Density: ≥0.65-0.8 g/ml   Equilibrium Water Capacity@25℃ ≥ 20.5-22.5 Equilibrium Methanol Capacity wt% ≥ 15.0 Heat of Adsorption BUT/lb of H2O 1800 Crush Strength N≥ 30-80 Variation Coefficient 0.3 Attrition Rate: wt%≤ 0.1 Size Qualification % ≥ 98 Package Moisture wt % ≤ 1.5...
[SPECIFICATION]: silica gel beads size: 1/16"-5/32"inch(2-4mm); weight:1lbs/bottle;[APPLICATION]: The desiccant beads are ideal for eliminating unwanted excess moisture for clothing, jewelry, electronics, cameras, books, documents, photos, firearms, ammo cans, and so on (Not applicable to food). Our beads won't dry the air excessively to damage plants, furniture, or other household goods.[LONG...
CT5 is a blend of kaolinite and montmorillonite clays. It is great at pulling difficult to remove oxidized color bodies and carotenoids. It has a highly active surface area well suited for the removal of impurities from edible oils. NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot...
CT1 is a kaolinite clay that is great at pulling difficult to remove oxidized color bodies, chlorophylls, and carotenoids. It has a highly activated surface area well suited for the removal of impurities from edible oils. NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns...
W3 is a highly active adsorptive clay designed for difficult to bleach oils. It has a high cation exchange capacity paired with high moisture content making it ideal for adsorption of impurities such as chlorophyll, carotenes, heavy metals, phospholipids, soaps, and other impurities. NOTICE: In order to guarantee our chemicals are factory-fresh...
W1 (TM)  is an acid activated bentonite clay adsorbent specific for the removal of chlorophyll, heavy metals, and fats. W1 is very effective at bleaching and refining while preserving the terpenes present in the oil. Unlike other clays, the ability to remove soaps and free fatty acids which are produced...
W2 is a natural bleaching clay offering mild yet efficient results. It is heat activated to increase its adsorptive power without the use of any acids. The lack of Bronstead and Lewis acid sites prevents terpene isomerization and keeps the terpene profile the same while also slowing the oxidation rate...
Spinner