Glassware

Specification Necks: 2 Material: Borosilicate Glass 3.3 SKU SIZE VERTICAL NECK ANGLED NECK DIS-2NRF-1L 1L 24/40 24/40 DIS-2NRF-2L 2L 24/40 24/40 DIS-2NRF-5L 5L 34/45 24/40 DIS-2NRF-10L 10L 34/45 24/40 DIS-2NRF-20L 20L 45/50 24/40

Description Useful for introducing gas inlet tubes and thermometers into the flask. The Three-Neck Round-Bottom Flask has precision-ground sockets from borosilicate glass. Fitted with three precision-ground sockets One vertical centre neck Two angled side necks Side neck useful for introducing gas inlet tubes and thermometers etc., into the flask Manufactured...

[MATERIAL]: Borosilicate Glass 3.3. [HEAD TYPE]: Hexagon. [JOINT SIZE]: 14/20, 24/40, 34/45, 45/50 Male Tapered. [SEAL WELL]: It can be sealed and moistureproof by inserting it into the mouth of the container. [APPLICATION]: It is mainly used for sealing the containers containing volatile substances, and can also play a role of moisture-proof.  

Capacity: 600mL; 2000mL/2L; 4000mL/4L Necks: 1 Center Joint: 24/40 Tapered Medium Frit: 30-50μm Vacuum Port: GL18-1/4" Material: Borosilicate Glass 3.3

DIS-TIA-1420 [MATERIAL]: Made of borosilicate Glass 3.3[SIZE]: Joint Size: 14/20 Female Tapered[TRANSPARENT AND VISIBLE]: The internal state can be seen through the shell to improve the safety[APPLICATION]: It is mainly used in laboratory with thermometer[ATTENTION]: After use, wipe and remove dust with alcohol to avoid pollution to other experimental equipment...

SKU: JAR-500ML-GL45 Capacity is 500ml. Graduation interval is 100ml. Material is Borosilicate Glass Used for storage as well as mixing and sampling. SKU: JAR-1L-GL45 Capacity is 1L. Graduation interval is 200ml. Material is Borosilicate Glass Used for storage as well as mixing and sampling.  

[MATERIAL]: Made of high borosilicate glass. [TRANSPARENT AND VISIBLE]: The material of the funnel is transparent, and the internal liquid state can be observed at any time. [APPLICATION]: Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source.  Capacity (ML)...

[Size]: 400mL/600mL/800mL/1L/2L. [Quality Materials]: The Glass Beaker is made of high quality Borosilicate glass, which is high hardness, strength, toughness and low inflation rate and good for long time using. [Precise Design]: The beaker has double-scale graduation intervals, an extra-large marking area. Double-scale graduations increment volume from the bottom to...

These filtration flasks are wide based for stability, tapered at the flask joint for a secure vacuum, and comes with a barbed side arm to make it easy to connect to ¼ in tubing. The borosilicate 3.3 construction allows for this laboratory glassware to work as hard as you do...

SKU: DIS-RBF-100ML 24/40 standard taper joint, heavy wall 100ML round bottom receiving flask. Used with cow type distribution adapter for short path distillation. SKU: DIS-RBF-250ML 24/40 standard taper joint, heavy wall 250ML round bottom receiving flask. Used with cow type distribution adapter for short path distillation. SKU: DIS-RBF-500ML 24/40 standard...

[Specifications]:Capacity: 1000mL / 1L , 2000Ml/ 2L, 5000ML / 5L, 10000ML /10 LNecks: 1Center Joint: 24/40 TaperedMaterial: Borosilicate Glass 3.3 [Materials]: The Erlenmeyer Flasks are crafted from premium Borosilicate Glass 3.3, which boasts high durability, resilience, toughness, and low thermal expansion rate and ensures long-lasting performance. [Accurate Design]: The Erlenmeyer...

Reducing Connecting Adapter Glass Joint Used to connect two lab glassware with dissimilar standard taper joints.  The glass adapter with taper joints are made of borosilicate glass 3.3, heavy wall, interchangable. Suitable for Joint glassware from botanical extraction to short path distillation to basic organic chemistry. SKU Top Outer Lower...

Specification [MATERIAL]: Borosilicate Glass 3.3 [CAPACITY]: 500ML/1L/2L [NECKS]: 1 [CENTER JOINT]: 24/40 Tapered [APPLICATION]: It is used to load a large amount of solution for experiment.

Protect your Cold Trap from your volatile's, utilizing more surface area in your condenser.  A chiller or chilled liquid, is pumped through the outer jacket then through the coil before it exits the condenser. These condensers come equipped with 10mm barbs for hosing connections. Dry ice is recommended on your receiving flasks...

SKU:DIS-FF3IN-2440 Top Diameter: 3”Joint Size: 24/40 Male TaperedMaterial: Borosilicate Glass 3.3 SKU :DIS-FF4IN-2440 Top Diameter: 4”Joint Size: 24/40 Male TaperedMaterial: Borosilicate Glass 3.3 SKU:DIS-FF6IN-2440 Top Diameter: 6”Joint Size: 24/40 Male TaperedMaterial: Borosilicate Glass 3.3

Wide-mouth bottles are designed for heavy-duty storage as well as mixing and sampling. The extra-wide mouth (69 mm inner diameter) gives easier access for pouring and removing pastes, powders, and larger items. They include a linerless, one-piece autoclavable orange poly­pro­pylene plug seal GLS 80-threaded cap with a drip-free pouring ring. 

Two vertical 34/45 side necksOne 24/40 center neckGlass material: high borosilicate glass 3.3

[MATERIAL]: Borosilicate Glass 3.3[JOINT SIZE]: 24/40 Male Tapered;Thermal Probe port: 14/20 Female Tapered; Distribution Joint: 24/40 Male Tapered[VIGREUX SET]: 5[VIGREUX BEND]: 20 degree[RECIRCULATING FLUID PORT]: ¼” GL14

Packable Distillation Head, High Efficiency. 34/45 Main Joint,24/40 DischargeJoints, GL-14 Barb Connections. Designed for 5L Flasks Single set of lowered vigreaux to allow for packing media Larger vacuum jacket allows for less heat loss during distillations Larger vapor path to allow for gas/vapor phase flow Increased internal diameter for faster,...

[MATERIAL]: Made of high quality, heavy duty, Borosilicate Glass. [CAPACITY]: 125mL, 250mL, 500mL, 1L, 5L, 10L, 15L, 20L Filtering Flask. [TRANSPARENT AND VISIBLE]: The body of the vacuum filter bottle is transparent, and the state of internal liquid can be observed at any time. [APPLICATION]: Vacuum filtration is widely applied...

1. 1PC Dewar Style Glass Cold Trap with 3/8" hose barbs, 35/20 Joint2. 1PC PTFE Cover3. 1PC 2L Receiving Flask, 35/204. 1PC Stainless Steel Lab Clamp, 35/205. 1PC Clamp Holder6. 1PC Chain Clamp7. 1PC Lab Support Stand

Specification MATERIAL: Borosilicate Glass 3.3 CAPACITY: 250ml DISTRIBUTION JOINT: 24/40, 34/35, 34/45 Male Tapered RECEIVING JOINT: 24/40, 34/35, 34/45 Female Tapered VACUUM PORT: 3/8" GL18

Used to connect dissimilar standard taper joint sizes.Lower inner joint is larger in size than the top outer joint.

SKU: DIS-GSTOP-1420Pennyhead Hollow Stopper 14/20SKU: DIS-GSTOP-2440Pennyhead Hollow Stopper 24/40SKU: DIS-GSTOP-3445Pennyhead Hollow Stopper 34/45