Best Sellers

Over time, the seal on your vacuum oven will begin to leak and cause a poor vacuum in the chamber. This is due to the high heat and constant strain put on the gasket after many uses. This gasket serves as a replacement and perfectly fits the DZF-6020 vacuum oven.

Specification Tube I.D.: 1/4", 3/8", 1/2" Length: 10FT/25FT/100FT Durometer Hardness (Shore A): 50~55A Material: Silica Gel Working Temp.: -60℃ to 220℃ Rohs: Compliant FDA: Compliant Reach: Compliant Feature [HIGH PERFORMANCE]: The product can effectively prevent ultraviolet, ozone and moisture. Silicone tube is elastic, stretchable and compression resistant. Low compression set...

DOWNLOAD SAFETY DATA SHEET T-41® Acid activated bentonite clay, contains carbon, low pH (3) Consistent particle size, good flow rate Can be used for oil purification, distillation prep and pesticide removal NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.

Specification Item Type: 3-Way TEE Connection Size: KF16, KF25, KF40, KF50 Material: Stainless Steel 304 Working Temp: -58°F~392°F Feature [Size]: KF TEE Fittings. [Quality Materials]: The TEE is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise...

Datasheet for Hex Plug Specification Product: Hex Head Plug, End Plug Connection Type: NPT male Connection Size: 1/4'', 3/8'', 1/2'', 3/4'' Material: Stainless Steel 304 Working Temp: -67°F~428°F Feature [Quality Materials]: The END PLUG is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance...

[Size]: 1/4" NPT Female x 1/4" NPT Female. [Quality Materials]: The ball valve is made of high quality 304 stainless steel and the handle is made of Hard Plastic, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: With 1/4" NPT Female x...

[Size]: 1-1/2", 2" Tri Clamp. [Quality Materials]: The Tri-Clamp butterfly valve is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: The pull style handle allows you to set the valve in three different positions simply by pulling and...

 [Size]: Fit Tri Clamp, 1.5" or 2" available. [Quality Materials]: The Process View Sight Glass are constructed with SUS304 housing, Tempered Glass, and PTFE seals which is durable, stable, rust and corrosive-resistant, and good for a long time using. [Precise Design]: Process view sight glasses are often installed as a...

Sintered Filters are result of a fusion of metal particles which forms a strong rigid filter. This technology allows for an efficient and effective separation between desired solute and undesirables. Reliable in design, this filtration tool is a key component to have in any extraction process. The Sintered disc provides...

Kirkland Signature Parchment Paper - 2 x 205 Sqft Rolls Features Kosher Genuine Vegetable Parchment Paper FSC Certified Multipurpose Non-Stick Paper - Perfect for baking, cooking, & roasting 15 in x 164 ft rolls 205 square feet per roll 2-count Specifications Brand: Kirkland Signature Dimensions - Length164 ft. Dimensions -...

Specification Connection Type: ISO-KF Flange Connection Size: KF10, KF16, KF25, KF40, KF50 Material: Stainless Steel 304 Working Temp: -58°F~392°F Service: Steam, Air, Water, Oil, Gasoline, Natural Gas, Most solvents and acids that are compatible with 304SS. Feature [Size]: As option describe. [Quality Materials]: The clamp is made of high-quality 304...

Specifications: Cap: GL-14, GL-18, GL- 25 Thread, Open top Cap Material: Polybutylene Terephthalate (PBT) Connector: 1/4", 3/8" ,1/2" Hose Barb, Straight Connector Material: Polypropylene Seal Material: PTFE Working Temperature range: -40℃–140℃ Melting Point: 160℃-180℃ Advantage: 1. Modified plastics2. It can work at 140 ℃ for a long time and the...

Capacity: 600mL; 2000mL/2L; 4000mL/4L Necks: 1 Center Joint: 24/40 Tapered Medium Frit: 30-50μm Vacuum Port: GL18-1/4" Material: Borosilicate Glass 3.3

This one-way check valve allows flow in only one direction. When the flow stops the valve automatically closes to stop materials from back-flowing. The pressure required to open the valve and be adjusted by swapping out the inner spring (only one spring included) or rotating the spring plate. Quickly comes...

CLICK HERE TO VIEW THE SIZECHART In addition to having the versatility of standard spools, sleeved spools have an open top shell over the spools outer wall. It provides the user the option to thermally influence the inner tube and its content without disrupting any ongoing process. Whether it is...

CLICK HERE TO VIEW THE SIZECHART In addition to having the versatility of standard spools, sleeved spools have an open top shell over the spools outer wall. It provides the user the option to thermally influence the inner tube and its content without disrupting any ongoing process. Whether it is...

[MATERIAL]: Porcelain. [APPLICATION]: Suitable for rapid filtration in laboratory.[HIGH PERFORMANCE]: Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10 -5 ; Gradually increasing to 4.69 x 10 -5 at 1050°C; Glaze - No softening occurs up to 1000°C, and it is...

Specification Connection Type: NPT female x NPT male x NPT female Connection Size: 1/4", 3/8", 1/2" Item Shape: Tee Material: Stainless Steel 304 Pressure Rating: 21 MPa Working Temp: -67°F~428°F Feature [Quality Materials]: The TEE is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance...

Specification Connection Type: NPT male x NPT male x NPT female Connection Size: 1/4", 3/8", 1/2" Item Shape: Tee Material: Stainless Steel 304 Pressure Rating: 21 MPa Working Temp: -67°F~428°F Feature [Quality Materials]: The TEE is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive...

Specifications Fits Tri-Clamp: 12" Body Material: Stainless Steel Glass Material: Borosilicate 1 x 1.5" Tri-Clamp Ports 2 x 1/4" FNPT Ports 2 x 1/2" MNPT Ports 2 x 2" Viewing Ports Max Pressure: 100 PSI Max Temp: 250℃/482°F Feature [Size]: 12" LID, 2 x 1/4" NPT female, 2 x 1/2"...

[Material]: 304 Stainless Steel Bearing Balls. [Package]: 100 pieces. [Size]: 1/4in. [Advantages]: Higher quality and more durability, reducing replacement and maintenance cost. The finest quality chrome steel produced in accordance with the highest industry standards. Modern furnaces with precisely controlled atmospheres and temperatures are used for heat treating to assure...

[Parameters]:Capacity: 20ml × 6pcs;Maximum Relative Centrifugal Force:1435xg;Speed: ≥3000r/min, ≤4000r/min±10%;Maximum Speed: 4000r/min±10%;Adjustable Speed control from 0-4000RPM;Economic LAB Centrifuge, easy and fast;[Using Conditions]: Ambient temperature: 0~30℃; Relative moisture: <80%; No electroconductive dust, explosive and corrosive gas in the surrounding air. Don’t put anything on the lid;[Advantages]: Scope of supply includes the rotor; High speed for...

SKU:CF-TUBE-20ML Ten pack of 20 mL centrifuge tubes inserts. The tubes do not come with caps. Works well as inserts for centrifuges. SKU: CF-TUBE-50ML Two pack of 50 mL centrifuge tubes inserts. The tubes do not come with caps. Works well as inserts for centrifuges. Also available in 20 mL.

Specification Item Type: 90 Degree Elbow Vacuum Fitting Connection Type: KF to KF Connection Size: KF16, KF25, KF40, KF50 Material: Stainless Steel 304 Working Temp: -58°F~392°F Feature [Quality Materials]: The vacuum fittings elbow is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and...