HFS Products

HFS In-line Condensing Spool allow you to add to remove heat while your product flows through the spool. Interior piping is completely segregated from the coolant so there is no chance of contamination. Coolant is pumped through 2 ports while product flows through the main spool. This item is also...

[Size]: 1/4" NPT Female x 1/4" NPT Female. [Quality Materials]: The ball valve is made of high quality 304 stainless steel and the handle is made of Hard Plastic, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: With 1/4" NPT Female x...

Datasheet for Hex Plug Specification Product: Hex Head Plug, End Plug Connection Type: NPT male Connection Size: 1/4'', 3/8'', 1/2'', 3/4'' Material: Stainless Steel 304 Working Temp: -67°F~428°F Feature [Quality Materials]: The END PLUG is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance...

Specification Connection Type: 1/4" MNPT, 1/2" MNPT Ball Size: 25mm, 50mm Material: 304 Stainless Steel Working Temp.: -58°F~482°F Service: Air, Water, Oil, Most solvents and acids that are compatible with 304SS. Feature [Quality Materials]: The shower ball is made of high quality 304 stainless steel, which is durable, stable, rust...

[MATERIAL]: Borosilicate Glass 3.3. [HEAD TYPE]: Hexagon. [JOINT SIZE]: 14/20, 24/40, 34/45, 45/50 Male Tapered. [SEAL WELL]: It can be sealed and moistureproof by inserting it into the mouth of the container. [APPLICATION]: It is mainly used for sealing the containers containing volatile substances, and can also play a role of moisture-proof.  

Specification Item Type: 3-Way TEE Connection Size: KF16, KF25, KF40, KF50 Material: Stainless Steel 304 Working Temp: -58°F~392°F Feature [Size]: KF TEE Fittings. [Quality Materials]: The TEE is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise...

Specification Connection Type: NPT female x NPT female x NPT male Connection Size: 1/4", 3/8", 1/2" Item Shape: Tee Material: Stainless Steel 304 Pressure Rating: 21 MPa Working Temp: -67°F~428°F Feature [Quality Materials]: The TEE is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive...

Over time, the seal on your vacuum oven will begin to leak and cause a poor vacuum in the chamber. This is due to the high heat and constant strain put on the gasket after many uses. This gasket serves as a replacement and perfectly fits the DZF-6020 vacuum oven.

Specification Connection Type: NPT female x NPT male x NPT female Connection Size: 1/4", 3/8", 1/2" Item Shape: Tee Material: Stainless Steel 304 Pressure Rating: 21 MPa Working Temp: -67°F~428°F Feature [Quality Materials]: The TEE is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance...

HFS's 11 cu ft Insulated HDPE Dry Ice Bin is Ideal for ice cream, frozen food, dry ice & pharmaceutical distribution. Also used for retail display applications, catering, concessions, and special events. Squared interior corners for better cube utilization. Features Material: Food-Grade High-Density Polyethylene (HDPE) Density: 3" Heat Loss: 4-7%/24H...

 [Size]: Fit Tri Clamp, 1.5" or 2" available. [Quality Materials]: The Process View Sight Glass are constructed with SUS304 housing, Tempered Glass, and PTFE seals which is durable, stable, rust and corrosive-resistant, and good for a long time using. [Precise Design]: Process view sight glasses are often installed as a...

[Material]: 304 Stainless Steel Bearing Balls. [Package]: 100 pieces. [Size]: 1/4in. [Advantages]: Higher quality and more durability, reducing replacement and maintenance cost. The finest quality chrome steel produced in accordance with the highest industry standards. Modern furnaces with precisely controlled atmospheres and temperatures are used for heat treating to assure...

Compound Info Compression Resistance: Excellent Acid Resistance: Good Alkali Resistance: Poor Ethanol＜10%: Good Ethanol 10% - 40%: Poor Ethanol＞40%: Do Not Use Oil Resistance: Good Abrasion Resistance: Excellent Thermal Properties Min Temp.: -58°F (-50°C) Max Temp.: 450°F (232°C)

This one-way check valve allows flow in only one direction. When the flow stops the valve automatically closes to stop materials from back-flowing. The pressure required to open the valve and be adjusted by swapping out the inner spring (only one spring included) or rotating the spring plate. Quickly comes...

Capacity: 600mL; 2000mL/2L; 4000mL/4L Necks: 1 Center Joint: 24/40 Tapered Medium Frit: 30-50μm Vacuum Port: GL18-1/4" Material: Borosilicate Glass 3.3

Specification Tube I.D.: 1/4", 3/8", 1/2" Length: 10FT/25FT/100FT Durometer Hardness (Shore A): 50~55A Material: Silica Gel Working Temp.: -60℃ to 220℃ Rohs: Compliant FDA: Compliant Reach: Compliant Feature [HIGH PERFORMANCE]: The product can effectively prevent ultraviolet, ozone and moisture. Silicone tube is elastic, stretchable and compression resistant. Low compression set...

Specifications: Cap: GL-14, GL-18, GL- 25 Thread, Open top Cap Material: Polybutylene Terephthalate (PBT) Connector: 1/4", 3/8" ,1/2" Hose Barb, Straight Connector Material: Polypropylene Seal Material: PTFE Working Temperature range: -40℃–140℃ Melting Point: 160℃-180℃ Advantage: 1. Modified plastics2. It can work at 140 ℃ for a long time and the...

CLICK HERE TO VIEW THE SIZECHART In addition to having the versatility of standard spools, sleeved spools have an open top shell over the spools outer wall. It provides the user the option to thermally influence the inner tube and its content without disrupting any ongoing process. Whether it is...

[Size]: 1-1/2", 2" Tri Clamp. [Quality Materials]: The Tri-Clamp butterfly valve is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: The pull style handle allows you to set the valve in three different positions simply by pulling and...

[MATERIAL]: Made of high borosilicate glass. [TRANSPARENT AND VISIBLE]: The material of the funnel is transparent, and the internal liquid state can be observed at any time. [APPLICATION]: Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source.  Capacity (ML)...

Specification Connection Type: ISO-KF Flange Connection Size: KF10, KF16, KF25, KF40, KF50 Material: Stainless Steel 304 Working Temp: -58°F~392°F Service: Steam, Air, Water, Oil, Gasoline, Natural Gas, Most solvents and acids that are compatible with 304SS. Feature [Size]: As option describe. [Quality Materials]: The clamp is made of high-quality 304...

CLICK HERE TO VIEW THE SIZECHART In addition to having the versatility of standard spools, sleeved spools have an open top shell over the spools outer wall. It provides the user the option to thermally influence the inner tube and its content without disrupting any ongoing process. Whether it is...

NOTE: EXA-JACKET, EXA-DEWAX, EXA-SPOOL series products can be customized according to your needs. For more details, technical support or other questions, please call direct (626) 332-7744. A jacketed spool is a standard spool but with as enclosed shell. This feature provides the user the option to thermally influence the inner...

[Size]: 3/8" female NPT x 24"/48"/60"/72"/96" Length. [Quality Materials]: The Braided Hose is made of high quality 304 stainless steel and the inner liner is made of high quality PTFE which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: With 3/8" NPT female...