New Products

Datasheet for 90° Elbow JIC Male to NPT Male Specification Connection Type(s): MNPT, MJIC Item Shape: Elbow 90 Degree Material: 304 Stainless Steel Working Temp.: -67°F~428°F Feature [Size]: 90° Elbow JIC Male to NPT Male. [Quality Materials]: The JIC Male x NPT Male ELBOW is made of high quality 304 stainless steel, which...

DOWNLOAD SAFETY DATA SHEET Silica Gel-User Manual Texalan Silica Gel Powder 60A or 90A [SIZE]: 70-230 Mesh/200-400Mesh, Pore Radius: 60A. 100-300Mesh, Pore Radius: 90A. [APPLICATION]: For the separation and purification of effective component and the preparation of high-purity substances and the dehydration of organic substances. [SPOT OF LIGHT]: Silica Gel...

Over time, the seal on your vacuum oven will begin to leak and cause a poor vacuum in the chamber. This is due to the high heat and constant strain put on the gasket after many uses. This gasket serves as a replacement and perfectly fits the DZF-6050 vacuum oven....

DOWNLOAD SAFETY DATA SHEET T-41® Acid activated bentonite clay, contains carbon, low pH (3) Consistent particle size, good flow rate Can be used for oil purification, distillation prep and pesticide removal NOTICE: In order to guarantee our chemicals are factory-fresh and untainted, we cannot accept consumables as returns for any reason.

TTRACK-32P This asphalt rack can hold 32 test tubes or beakersThe red top is made of PVC, which will protect your test tubes or beakers from scratchesThe bottom clear plate is for holding water that comes out of a test tube or beaker so it doesn't get dirty on your...

[SIZE]: 16" x 12"/48"/60", thickness: 0.0135". [MATERIAL]: 100% Pure PTFE. [TEMPERATURE RANGE]: 350℉ to 500℉. [HIGH QUALITY]: This solvent-resistant pad is an excellent substitute for parchment paper. Since PTFE has a wide operating temperature range and it does not absorb non-polar solvents, it is a good purification material. [HIGH PERFORMANCE]:...

Datasheet & Manual for Commercial Grade Ultrasonic Cleaners Commercial Grade Ultrasonic Cleaners The HFS PS Series Ultrasonic Cleaners easily and effectively clean and sanitize using ultrasound from 40kHz to agitate even the smallest particles of debris. Features Built from high quality 304 Stainless Steel, these cleans will easy stand up...

Specification Vacuum Fittings Type: Centering Clamp Rings Size: KF10, KF16, KF25, KF40, KF50 Material: 304 Stainless Steel and Buna Working Temp.: 14°F~176°F Feature [Quality Materials]: The centering ring is made of high quality 304 stainless steel and Buna which is durable, stable, rust and corrosive resistance and good for long...

Specification Connection Type: KF to Tri-Clamp Connection Size: NW-25 to 1.5" Material: Stainless Steel 304 Working Temp: -58°F~392°F Feature [Size]: 1.5" Tri Clamp - KF25. [Quality Materials]: The adapter is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time...

SKU: COLDTRAP-1L-COVER Material:PTFE Application: For 1L Cold Trap Properties: High strength, toughness and self-lubrication at low temperatures; Good flexibility; Chemical inertness. SKU: COLDTRAP-2L-COVER Material:PTFE Application: For 2L Cold Trap Properties: High strength, toughness and self-lubrication at low temperatures; Good flexibility; Chemical inertness.  

Feature Units per order: 1 Unit Material: Stainless Steel Joint Size: 14#, 19#, 24#, 29#, 34#, 45# Feature superior chemical and temperature resistance to 932°F(500°C) Application: Keck clips also known as keck clamps, joint clips, or often just kecks, are fastening devices used to hold ground glass joints glassware when...

Feature Setting temperature precisely. Precise temperature control and adjustable speed, with speed switch to start or stop the stirring at any time. Timing function (0-9999min), audible and visual alarm. Dual Inside and outside sensors, the outside PT100 sensor for heated liquid. The inside K sensor for hot plate. One key...

This Kit Does NOT include a cold trap, vacuum pump, mantle, tubing or circulatorRecommendations:Vacuum Pumps: WELCH-3081-01Circulator: AD07H200-A11BMantle: MANTLE-10LAccessories: DIGIVAC-BULLSEYECold trap: COLDTRAP-2LSpecifications:Capacity: 10L = 2000- 5000 gramsRun time: 4 to 8 hours dependent upon material composition and throughputDistillation Temperature Range: 140-250CComponents:Boiling Flask: 10L 2 Neck Borosilicate Round Bottom Flasks – 34/45,...

Specification MATERIAL: Borosilicate Glass 3.3 CAPACITY: 250ml DISTRIBUTION JOINT: 24/40, 34/35, 34/45 Male Tapered RECEIVING JOINT: 24/40, 34/35, 34/45 Female Tapered VACUUM PORT: 3/8" GL18

Round Bottom Receiving FlaskSingle neckRound bottom35/20 jointSphericalMade of borosilicate glass

SKU:BRE-500 Click here to download manual instruction Working principle and scope of application: Laboratory equipment Rotary evaporator is mainly used for continuous distillation of a large number of volatile solvents under reduced pressure conditions. In particular, the reaction product can be isolated and purified by concentrating the extract and distilling...

Specification Item Type: 3-Way TEE Connection Size: KF16, KF25, KF40, KF50 Material: Stainless Steel 304 Working Temp: -58°F~392°F Feature [Size]: KF TEE Fittings. [Quality Materials]: The TEE is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise...

SKU: DIS-DADP5L-3445 Used to connect dissimilar standard taper joint sizes. 29/42 female joint, 29/42Lower inner joint is larger in size than the top outer joint. Male with O ring (5L) SKU: DIS-DADP5L-2942 Used to connect dissimilar standard taper joint sizes. 29/42 female joint, 29/42Lower inner joint is larger in size...

[MATERIAL]: Made of stainless steel 304. Bright polished finish for years of chemical resistance. [SIZE]: 9.5*5*4 cm; Maximum opening:3 cm. [UNIFORM CLAMPING FORCE]: The unique Y-shaped jaw can effectively provide uniform clamping force and avoid slipping. [LOCK NUT]: Screw lock nut design can help you to fix the size of...

Specifications Product: Plastic Taper Joint Clamp Keck Clip Units per order: 1 Unit Material: Polypropylene Melting Point: 160℃-180℃ Size: #24 fits ground joint size 24/40; #34 fits ground joint size 34/45; #45 fits ground joint size 45/50 Feature [Size]: #24, #34, #45. [Material]: Made of high quality Polypropylene, which is...

Powder Coated Aluminium Alloy German-style Cross Clamp/Clips(Extra Large) With T Screw German-style Cross Clamp(Extra Large) 1. Perfect for fixer use. 2. High-strength and sturdy. One end open:23mm, the other end open:38mm 3. Die-cast alloy with aluminum plated T screw head. For rods up to 19mm diameter. Made of Aluminum alloy.

Specification SIZE Platform Size Max Height Max Load 4x4x6" 4x4" 6" 7lbs 6x6x10" 6x6" 10" 17.5lbs 8x8x10" 8x8" 10" 33lbs 12x12x15" 12x12" 15" 55lbs   Feature [MATERIAL]: Stainless Steel 304. [HIGH PERFORMANCE]: Chemically-resistant. The height can be adjusted by simply turning the knob. [WORKING PRINCIPLE]: Taking advantage of the instability...

Specifications Units per order: 1 unit Diameter: 110mm, 120mm, 140mm Suitable flask: 150ml-1000ml, 500ml-3000ml, 1000ml(1L)-5000ml(5L) Thickness: 30mm Resistant Properties: --Corrosion: Alkali and Acid; --Non-Flammable; --Impermeable Features [Size]: Thickness: 30mm. With Diameter from 110mm - 140mm, it can fit round bottom flask from 150ml - 5000ml, choose the right cork washers...

Specifications Opening: 0-16mm Function: Fixing, Supporting. Application: Laboratory, processing workshop, others. For rods diamete:16mm Material:Aluminum die-cast with chromed Size: Blue head screw for rod up to 16mm.The clamping body is 6cm long and 2.8cm wide. Style: British Cross Clamp Features [Size]: The clamping body is 6cm long and 2.8cm wide....