SHOPHFS

Size: 60"X24"X32"The whole body of the work table is made of high quality stainless steel, and the surface of the table is made of thickened stainless steel;The surface of the table is flat and smooth;Disassemble and assemble easily.

0.16  ouncesSTURDY and DURABLE : This is a HIGH QUALITY, hardened and long lasting glass stirring rod that is made of solid glass and built to stand the test of time.LENGTH : Each glass stir stick is 250 mm (9.8 INCH) in length which is longer than an average stirrers...

SKU: DIS-GSTOP-1420Pennyhead Hollow Stopper 14/20SKU: DIS-GSTOP-2440Pennyhead Hollow Stopper 24/40SKU: DIS-GSTOP-3445Pennyhead Hollow Stopper 34/45  

DIS-TIA-1420 [MATERIAL]: Made of borosilicate Glass 3.3[SIZE]: Joint Size: 14/20 Female Tapered[TRANSPARENT AND VISIBLE]: The internal state can be seen through the shell to improve the safety[APPLICATION]: It is mainly used in laboratory with thermometer[ATTENTION]: After use, wipe and remove dust with alcohol to avoid pollution to other experimental equipment...

[Size]: Thread diameter: 3/8"-16; nuts diameter: 0.625"/15.875mm; nuts height: 0.472"/12mm; hex drive size: 5/8". 25 pcs/pack. [Quality Materials]: The nut is made of high-quality brass, which is durable, stable, rust and corrosion-resistant, and good for long-term use. [Precise Design]: The replacement nuts are designed for 1.5"-12" high pressure tri-clamp bolts,...

DATASHEET for HFS's Three Piece Ball Valve Specification Product Type: Three Piece Ball Valve Material: 304 Stainless Steel Connection Type: NPT female Connection Size: 1/2", 3/4", 1" Working Pressure: 1.6Mpa Max Working Temp.:150℃ Service Media: water, gas, and oil Feature [Size]: NPT Female x NPT Female. 1/2", 3/4", 1". [Quality Materials]: The...

DATASHEET for HFS's Three Piece Ball Valve [Size]: Fits Tri-Clamp 1", 1.5", 2", 2.5", 3". [Quality Materials]: The Three Piece Ball Valve is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using.  [Precise Design]: All-inclusive tee design, Non-Retention high...

[Size]: 1.5", 2", 3", 4", 6", 8", 10", 12". CLICK HERE TO VIEW THE DATASHEET. [Quality Materials]: The Clamp is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: Three segment clamps are constructed from 304 stainless...

1.Standard sizes available with various cross section .Various Watt Density options available.2.Robust Design with Choice of Terminal Exits .Available with built in Thermocouple3.Designed for even heat profile. Precision fit on Hot Runner Nozzles & Manifolds.4.Highly Non-corrosive.Maximum heat transfer due to more contact area.5.Advanced Thermal Engineering1 x PID Temperature Control Box...

These adapters are available in a wide range of sizes with just about any type of connection one could Triclamp adapters allows for different fittings with a vastly different connection type to be able to connect and work symbiotically. These adapters are available in a wide range of sizes with...

Specification Connection Type: Tri Clamp / Hose Barb Connection Size: 1.5" / 1/2". Material: 304 Stainless Steel Working Temp.: 58°F~392°F Service: Air, Water, Oil, Most solvents and acids that are compatible with 304SS. Feature [Size]: 1.5" Tri Clamp -1/2" Hose Barb. [Quality Materials]: The adapter is made of high quality...

Datasheet for HFS Tri Clamp 4 Way Cross  Whether you’re branching out or converting 3 lines into one, a Tri clamp 4-way Cross could be the solution you are looking for. Specification Connection Type: Tri Clamp Connection Size: 1.5", 2", 3" Connection Count: 4 Item Shape: Cross Material: Stainless Steel...

[Size]: 4" tri clamp w/ 31PCS of φ9.5mm tube, 24" height. [Quality Materials]: The double Sleeve Condenser is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise Design]: When the liquid enters the heat exchange tube, and the jacket medium...

Material: SAE 304 Stainless Steel High pressure applications Butterfly Valve Design Working temperature: -65 Degrees to 300 Degrees F

This one-way check valve allows flow in only one direction. When the flow stops the valve automatically closes to stop materials from back-flowing. The pressure required to open the valve and be adjusted by swapping out the inner spring (only one spring included) or rotating the spring plate. Quickly comes...

These tri clamp stands are great for open blast and closed pressure extractors. They can also be used to hold dry sieves, and other components. These clamps are made from 304 stainless steel.CLICK HERE TO VIEW THE DATASHEET

Our tri clamp concentric reducers are made from 304 stainless steel and come with a high-polish finish. Concentric reducers are reducers which share a common center-line, resulting in a cone shape. [Size]: Tri Clamp x Tri Clamp. [Quality Materials]: The concentric reducer is made of high quality 304 stainless steel, which is durable, stable,...

Our tri clamp concentric reducers are made from 304 stainless steel and come with a high-polish finish. Concentric reducers are reducers which share a common center-line, resulting in a cone shape. These reducers also feature a 1/4" NPT fitting half way down the reducer, perfect for bottom fill or bi-flow systems. The downside of concentric...

Specification Connection Type(s): Tri Clamp Connection Size: 1.5'' Item Shape: Elbow 45 Degree Material: 304 Stainless Steel Working Temp.: -58°F~392°F Feature [Quality Materials]: The Tri Clamp ELBOW is made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using. [Precise...

Specification Connection Type(s): Tri Clamp Connection Size: 1.5'', 2'', 3'', 4'', 6'' Item Shape: Elbow 90 Degree Material: 304 Stainless Steel Working Temp.: -58°F~392°F Feature [Size]: Tri Clamp, Degree of Bend: 90. [Quality Materials]: The Tri Clamp elbow is made of high quality 304 stainless steel, which is durable, stable, rust...