Lab Equipment

Datasheet & Manual for Commercial Grade Ultrasonic Cleaners Commercial Grade Ultrasonic Cleaners The HFS PS Series Ultrasonic Cleaners easily and effectively clean and sanitize using ultrasound from 40kHz to agitate even the smallest particles of debris. Features Built from high quality 304 Stainless Steel, these cleans will easy stand up...

Description Useful for introducing gas inlet tubes and thermometers into the flask. The Three-Neck Round-Bottom Flask has precision-ground sockets from borosilicate glass. Fitted with three precision-ground sockets One vertical centre neck Two angled side necks Side neck useful for introducing gas inlet tubes and thermometers etc., into the flask Manufactured...

Specifications Product: Plastic Taper Joint Clamp Keck Clip Units per order: 1 Unit Material: Polypropylene Melting Point: 160℃-180℃ Size: #24 fits ground joint size 24/40; #34 fits ground joint size 34/45; #45 fits ground joint size 45/50 Feature [Size]: #24, #34, #45. [Material]: Made of high quality Polypropylene, which is...

[MATERIAL]: Porcelain. [APPLICATION]: Suitable for rapid filtration in laboratory.[HIGH PERFORMANCE]: Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10 -5 ; Gradually increasing to 4.69 x 10 -5 at 1050°C; Glaze - No softening occurs up to 1000°C, and it is...

[MATERIAL]: Borosilicate Glass 3.3. [HEAD TYPE]: Hexagon. [JOINT SIZE]: 14/20, 24/40, 34/45, 45/50 Male Tapered. [SEAL WELL]: It can be sealed and moistureproof by inserting it into the mouth of the container. [APPLICATION]: It is mainly used for sealing the containers containing volatile substances, and can also play a role of moisture-proof.  

Specifications: Cap: GL-14, GL-18, GL- 25 Thread, Open top Cap Material: Polybutylene Terephthalate (PBT) Connector: 1/4", 3/8" ,1/2" Hose Barb, Straight Connector Material: Polypropylene Seal Material: PTFE Working Temperature range: -40℃–140℃ Melting Point: 160℃-180℃ Advantage: 1. Modified plastics2. It can work at 140 ℃ for a long time and the...

Specification Tube I.D.: 1/4", 3/8", 1/2" Length: 10FT/25FT/100FT Durometer Hardness (Shore A): 50~55A Material: Silica Gel Working Temp.: -60℃ to 220℃ Rohs: Compliant FDA: Compliant Reach: Compliant Feature [HIGH PERFORMANCE]: The product can effectively prevent ultraviolet, ozone and moisture. Silicone tube is elastic, stretchable and compression resistant. Low compression set...

Capacity: 600mL; 2000mL/2L; 4000mL/4L Necks: 1 Center Joint: 24/40 Tapered Medium Frit: 30-50μm Vacuum Port: GL18-1/4" Material: Borosilicate Glass 3.3

DIS-TIA-1420 [MATERIAL]: Made of borosilicate Glass 3.3[SIZE]: Joint Size: 14/20 Female Tapered[TRANSPARENT AND VISIBLE]: The internal state can be seen through the shell to improve the safety[APPLICATION]: It is mainly used in laboratory with thermometer[ATTENTION]: After use, wipe and remove dust with alcohol to avoid pollution to other experimental equipment...

Specification Diameter: 1/2" Length: 10 feet / 20 feet Material: Fiberglass Maximum temperature:1000°F, 537°C For use outdoors: NO Color: Black Rohs: Compliant Feature: 1. It is braided from a number of Textured Fiberglass Yarns. Engineered to provide superior sealing, protection, and longevity when compared to other materials.2. Graphite-impregnated fiberglass resists...

SKU: JAR-500ML-GL45 Capacity is 500ml. Graduation interval is 100ml. Material is Borosilicate Glass Used for storage as well as mixing and sampling. SKU: JAR-1L-GL45 Capacity is 1L. Graduation interval is 200ml. Material is Borosilicate Glass Used for storage as well as mixing and sampling.  

[Size]: 400mL/600mL/800mL/1L/2L. [Quality Materials]: The Glass Beaker is made of high quality Borosilicate glass, which is high hardness, strength, toughness and low inflation rate and good for long time using. [Precise Design]: The beaker has double-scale graduation intervals, an extra-large marking area. Double-scale graduations increment volume from the bottom to...

Feature Units per order: 1 Unit Material: Stainless Steel Joint Size: 14#, 19#, 24#, 29#, 34#, 45# Feature superior chemical and temperature resistance to 932°F(500°C) Application: Keck clips also known as keck clamps, joint clips, or often just kecks, are fastening devices used to hold ground glass joints glassware when...

CLICK HERE TO DOWNLOAD MANUAL WARNING: To reduce the risk of injury, do not attempt to use or maintain this unit until you read and understand the instructions. Do not permit untrained persons to use or maintain this unit. Features: (1) Low TemperatureCoolantcirculator is used wind-cool-type and complete-close-compressor set to refrigerate. By...

These filtration flasks are wide based for stability, tapered at the flask joint for a secure vacuum, and comes with a barbed side arm to make it easy to connect to ¼ in tubing. The borosilicate 3.3 construction allows for this laboratory glassware to work as hard as you do...

SKU: DIS-RBF-100ML 24/40 standard taper joint, heavy wall 100ML round bottom receiving flask. Used with cow type distribution adapter for short path distillation. SKU: DIS-RBF-250ML 24/40 standard taper joint, heavy wall 250ML round bottom receiving flask. Used with cow type distribution adapter for short path distillation. SKU: DIS-RBF-500ML 24/40 standard...

[Specifications]:Capacity: 1000mL / 1L , 2000Ml/ 2L, 5000ML / 5L, 10000ML /10 LNecks: 1Center Joint: 24/40 TaperedMaterial: Borosilicate Glass 3.3 [Materials]: The Erlenmeyer Flasks are crafted from premium Borosilicate Glass 3.3, which boasts high durability, resilience, toughness, and low thermal expansion rate and ensures long-lasting performance. [Accurate Design]: The Erlenmeyer...

Egg shaped magnetic stirring bars are particularly well suited for round bottom flasks. Their shape mimics that of a flask and ensures complete mixing. They also offer minimal contact when used in plastic containers. Recommended for our 2L, 5L and 10L short path distillation systems. Coating material: high temperature, chemical-resistant...

Specification [MATERIAL]: Borosilicate Glass 3.3 [CAPACITY]: 500ML/1L/2L [NECKS]: 1 [CENTER JOINT]: 24/40 Tapered [APPLICATION]: It is used to load a large amount of solution for experiment.

Protect your Cold Trap from your volatile's, utilizing more surface area in your condenser.  A chiller or chilled liquid, is pumped through the outer jacket then through the coil before it exits the condenser. These condensers come equipped with 10mm barbs for hosing connections. Dry ice is recommended on your receiving flasks...

Digital PID controlled heating mantle with an analog stir bar feature. Mantel set includes mantel, lab rod/stand and thermocouple. Power:220V Characteristics:PID single screen temperature controller.Heating and stirring can be used simultaneously , stepless speed adjustable.PT 100 temperature sensor, with adjustable sensor rack and stainless rods.Capacity: 20LHeating Mode: Surface heat condutionSurface...

High-quality Lab Stand with cast iron base and stainless-steel rod Component: Base Material: Cast Iron Rod Material: Stainless-Steel Thread on the Base: M10x1.5 Size: Base 8*5.25", Rod 22"; Base 11.8*7", Rod 26"; Base 11*6", Rod 36". Feature: Acid-resistant cast iron base High quality Pure stainless steel Rod Various sizes are...

3 Finger Labs Adjustable Clamp Retort Skidproof Rubber Coated Prong Jaws (Large) Specification SKIDPROOF: 3 Rubber Coated Prong Prong Count: 3 Jaws Diameter(Capacity): 0-70mm Total length(mm):280 Length of rod(mm):165 Diameter of rod(mm):8 Material:Zinc alloy with chromed High Quality: Made of Alloy and Hang Plating Chrome Package Content: 1 x Three...

[MATERIAL]: Made of stainless steel 304. Bright polished finish for years of chemical resistance. [SIZE]: 9.5*5*4 cm; Maximum opening:3 cm. [UNIFORM CLAMPING FORCE]: The unique Y-shaped jaw can effectively provide uniform clamping force and avoid slipping. [LOCK NUT]: Screw lock nut design can help you to fix the size of...