No products in the cart.
684 Arrow Grand Circle, Covina, CA 91722 --- 626.332.7744 --- Mon-Fri 10:00AM-6:00PM --- Sat 9AM-12AM
121 NE 40th St, Oklahoma City, OK 73105 --- 405.926.0411 --- Mon-Fri 9:30AM-6:30PM
Heated Circulator Standard Digital, Ambient +5 to 200 deg C, 220V
Product Code HEATER-SC-15L-100
WARNING: To reduce the risk of injury, do not attempt to use or maintain this unit until you read and understand the instructions. Do not permit untrained persons to use or maintain this unit.
Features:
(1) Low TemperatureCoolantcirculator is used wind-cool-type and complete-close-compressor set to refrigerate. By microprocessor control, cooling systems. automatically start, time-lapse turn off, with over-heat and over-current protection
(2) The Circulator may export the coolant from reservoir, cool or maintain the temperature outside the laboratory container or establish a second constant temperature field.
(3) Microprocessor controls the time switchfrom 0-100 hours.
(4) Dual windows, Red and Green Touch display the set temperature and the actualtemperature, respectively. The readout accuracy is ±0.1°C, and the stability is ± 0.1°C.
(5) Microprocessor-controlled-lock function may lock all parameters.
(6) Having Easy-to-usemicroprocessor controltouch keys.
Technical data:
|
Model |
HEATER-SC-15L-100 |
HEATER-SC-15L-200 |
HEATER-SC-30L-200 |
|
Tem. range (℃) |
RT+5~100 |
RT+5~200 |
RT+5~200 |
|
Tem. volatility (℃) |
±0.05~±0.2 |
±0.05~±0.2 |
±0.05~±0.2 |
|
Display resolution (mm³) |
0.1 |
0.1 |
0.1 |
|
Tank size (mm) |
300*240*200 |
300*240*200 |
400*330*230 |
|
Tank depth (mm) |
200 |
200 |
230 |
|
Pump flow (L/min) |
0-20 |
Cycle |
Cycle |
|
Tank open size (mm²) |
235*160 |
235*160 |
310*280 |
|
Drainage |
Y |
NO |
NO |
|
Operatioin voltage (V) |
110 |
220 |
220 |
|
Power (W) |
1000 |
2980 |
4500 |
Display:
(1) 
Refrigeration light: When the light flashing refrigeration is on, the cooling function start working after 2-3 minutes, Refrigeration lights long time bright.
(2) 
Circulating pump light: When long press the RUN key button machine, circulating pump auto working, when shut off, the light dark.
(3) 
Heating light: Start heat function, the light on, or it’s off.
(4) 
Water lever light: The light tip groove liquid lever cannot under working table 30mm.
(5) 
: Long press 5 second, the device start or stop working .
(6) 
SET key: TEM Setting and TEM Measure set confirm, and amend etc.
(7) 
LEFT MOVE Key: SETTING data move key.
(8) 
UP and DOWN Key: SETTING DATA “+”or “-” Long press UP key, can be check environment temperature.
Notice: If TEM Measure area display “
” indicate sensor input or the signal over measurement limit, if display “
”, indicate sensor short circuit or the input signal is lower than the lower limited range when the input signal is beyond the scope of range, buzzer, press any key be muted.
Tech Tip:
(1) Before using, should add full liquidmedium.
(2) The power supply should be match with the technical parameter. The power should be greater than or equalto the total power of the machine. Ground wireshould be used (Connect the snail located at the left bottom on the rear side).
(3) The machineshould be put in dry anddrafty place, rear and two sides 400mm apart from other articles.
(4) After done, all switchesshould be in turn off,Pull out plug, dry and clean bath.
Packing list:
|
1. Main machine |
1set |
|
2. Power supply wire |
1pc |
|
3. Rubber tube |
1pc |
|
4. Cover |
1pc |
|
5. Operational Manual |
1copy |
Local Delivery
We offer delivery services for large orders to customers from Central California all the way to San Diego. Please call our sales team for more information on weekly, bi-weekly, or monthly deliveries and pricing. 626.332.7744
Shipping Time
Our main warehouse is located near Los Angeles, you can use the map below to estimate delivery time. Most orders ship one business day after the order is placed, then the transit days will follow. Below the map you will find exceptions to these rules for certain products.
Some items we sell may be warehoused in Amazon's warehouses across the US. If the item you order happens to be in on of their warehouses it will generally arrive in 3 days. If you need to know about a specific item please feel free to contact us and we'll let you know.
Larger and heavier items have to be shipped via LTL Freight. LTL shipments tend to take longer to arrive, but they have the benefit of being much safer for heavy and delicate items. If your order has to be shipped by LTL Freight we will contact you to find out if the delivery address is a residential or commercial address, and whether a loading dock or forklift is available. The freight company will call you to arrange a delivery appointment, usually a day before.
Shipping Costs
The cost of shipping varies based on where you live, how much the order weighs, and the value of the order. We've outline our shipping guidelines below:
To Contiguous US:
|
Item Weight |
Shipping Costs |
|
0-50 lbs |
Orders over $100 ship free; |
|
Over 50 lbs |
The shipping cost will be automatically calculated by the system based on the weight of your items and the delivery address provided. |
To Alaska, Hawaii, and other US Territories:
Cost will be calculated by weight at time of checkout.
To Other Countries:
We currently can offer shipping service internationally.
Please contact us for international shipping cost: info@hfsusa.com
HFS Warranties
HFS warrants that the Product (“Product”), when properly used and installed in conformance with HFS’ specifications for such Product, will be free from defects in materials and workmanship and will substantially conform to HFS specifications for such Product during the Warranty Period.
What does this limited warranty cover?
This Limited Warranty applies to new HFS Products purchased from an authorized HFS dealer by the original purchaser for normal use and not for resale. Warranty covers Products which cease to operate correctly due to no fault of the customer, at HFS' sole discretion.
How long does limited warranty coverage last?
HFS Product warranties last for different periods of time. To determine the warranty period for your specific Product, please visit www.HardwareFactoryStore.com/contact-us/. A valid proof of purchase may be required to prove eligibility. If you do not have a valid proof of purchase, the limited warranty period will be measured from the date of sale from HFS to the authorized distributor. Warranties are non-transferable, only the original purchaser will receive warranty benefits.
My Product has failed, now what?
If you are having trouble with a Product, before seeking limited warranty service, first follow the troubleshooting procedures that HFS or your reseller/distributor provides.
To obtain limited warranty service, you must first submit a Return Merchandise Authorization at www.HardwareFactoryStore.com/contact-us/
What will HFS do?
HFS will replace the Product with a functionally equivalent replacement Product, transportation prepaid. HFS may replace your Product with a product that was previously used, repaired and tested to meet HFS specifications. You receive title to the replaced Product at delivery to the carrier at the HFS shipping point and HFS retains title to the returned Product. You are responsible for importation of the replaced Product, if applicable. HFS warrants that the replaced Products are covered for the remainder of the original Product warranty or 90 days, whichever is greater.
What does this limited warranty not cover?
The limited warranty does not cover damage resulting from misuse, accident, negligence, modification or alteration to hardware or software, tampering, unsuitable physical or operating environment beyond Product specifications, improper maintenance, or failure caused by a product for which HFS is not responsible. There is no warranty of uninterrupted or error-free operation or defects in design. There is no warranty for loss or damage of valuables please test equipment before putting into use. There is no warranty for Product with removed or altered identification labels. HFS DOES NOT PROVIDE ANY OTHER WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF IMPLIED WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU. HFS is not responsible for returning to you product which is not covered by this limited warranty. Warranties do not cover consumable maintenance items which are designed to be replaced periodically such as: gaskets, seals, cutter blades, pump oil, cutting sticks, etc.
How is our liability limited?
HFS AND ITS AFFILIATES, SUPPLIERS, DISTRIBUTORS, AND RESELLERS ARE NOT LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES 2) LOSS OF, OR DAMAGE TO, YOUR VALUABLES; OR 3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF INFORMED OF THE POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW LIMITATION OF LIABILITY, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. HFS reserves the right to modify these warranty terms at any time.
Specifically Not Covered:
Some parts of certain products are specifically not covered by warranty. The reason for this is that these parts have been found to be damaged by user negligence, not as a result of manufacturer defect. Here is the current list of items specifically not covered:
Paper Cutters - Fence Knob, Safety Latch & Pin
How do local laws apply?
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION
HFS warrants that the Product (“Product”), when properly used and installed in conformance with HFS’ specifications for such Product, will be free from defects in materials and workmanship and will substantially conform to HFS specifications for such Product during the Warranty Period.
What does this limited warranty cover?
This Limited Warranty applies to new HFS Products purchased from an authorized HFS dealer by the original purchaser for normal use and not for resale. Warranty covers Products which cease to operate correctly due to no fault of the customer, at HFS' sole discretion.
How long does limited warranty coverage last?
HFS Product warranties last for different periods of time. To determine the warranty period for your specific Product, please visit www.HardwareFactoryStore.com/contact-us/. A valid proof of purchase may be required to prove eligibility. If you do not have a valid proof of purchase, the limited warranty period will be measured from the date of sale from HFS to the authorized distributor. Warranties are non-transferable, only the original purchaser will receive warranty benefits.
My Product has failed, now what?
If you are having trouble with a Product, before seeking limited warranty service, first follow the troubleshooting procedures that HFS or your reseller/distributor provides.
To obtain limited warranty service, you must first submit a Return Merchandise Authorization at www.HardwareFactoryStore.com/contact-us/
What will HFS do?
HFS will replace the Product with a functionally equivalent replacement Product, transportation prepaid. HFS may replace your Product with a product that was previously used, repaired and tested to meet HFS specifications. You receive title to the replaced Product at delivery to the carrier at the HFS shipping point and HFS retains title to the returned Product. You are responsible for importation of the replaced Product, if applicable. HFS warrants that the replaced Products are covered for the remainder of the original Product warranty or 90 days, whichever is greater.
What does this limited warranty not cover?
The limited warranty does not cover damage resulting from misuse, accident, negligence, modification or alteration to hardware or software, tampering, unsuitable physical or operating environment beyond Product specifications, improper maintenance, or failure caused by a product for which HFS is not responsible. There is no warranty of uninterrupted or error-free operation or defects in design. There is no warranty for loss or damage of valuables please test equipment before putting into use. There is no warranty for Product with removed or altered identification labels. HFS DOES NOT PROVIDE ANY OTHER WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF IMPLIED WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU. HFS is not responsible for returning to you product which is not covered by this limited warranty. Warranties do not cover consumable maintenance items which are designed to be replaced periodically such as: gaskets, seals, cutter blades, pump oil, cutting sticks, etc.
How is our liability limited?
HFS AND ITS AFFILIATES, SUPPLIERS, DISTRIBUTORS, AND RESELLERS ARE NOT LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES 2) LOSS OF, OR DAMAGE TO, YOUR VALUABLES; OR 3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF INFORMED OF THE POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW LIMITATION OF LIABILITY, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. HFS reserves the right to modify these warranty terms at any time.
Specifically Not Covered:
Some parts of certain products are specifically not covered by warranty. The reason for this is that these parts have been found to be damaged by user negligence, not as a result of manufacturer defect. Here is the current list of items specifically not covered:
Paper Cutters - Fence Knob, Safety Latch & Pin
How do local laws apply?
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION
Recently Viewed